News
FRIENDLY/link Nantong zhuolida Ali SAMSAN Corrosion machining Nantong zhuolida HJD Shenzhen zhuolida Esprit print
Now the mobile phone is more and more expensive, sometimes know the handset into the ash but dare not clean, because the wrong cleaning method will damage the machine, often thousands of repairs......Let's take a look at how to clean the mobile phone handset network!
1, with a relatively hard small brush dipped in a small amount of alcohol or liquor, gently brush the receiver.
2. Gently scrape the garbage with a needle, then gently brush it with a brush.
3, it is not recommended to clean up after brushing, brush a few times to clean up again, in the process of brushing, the receiver down, so that garbage is not easy to enter the phone.
In addition, you can also clean the dust of mobile phone handset network by the following methods:
Toothpick + transparent tape.Wrap the toothpick upside down with a circle of transparent tape, and then remove the ash.But it's less efficient.
A straw.This works a little better. Take a straw, press one end flat, and cut it at an Angle. You have a little spatula that will allow you to pick the ash out of the receiver more efficiently than a toothpick.
Brush.Disassembly, but brush with a brush.If you do not have the ability to dismantle the machine, it can only use a brush brush in the outer layer of the receiver to reduce dust.
If the handset volume is low, it is suggested that:
1. During the call, use the volume up button to turn up the volume.
2. Some mobile phones support extra-large volume of calls. After turning on this function, observe whether the volume of the receiver is still small.
3. Try to change to another quiet position.
4. Whether it is normal to try to insert the headset.
Mobile phone handset network is mainly dust-proof, common mobile phone handset network etching processing with the material is SUS304 stainless steel, 304 stainless steel is a kind of universal stainless steel material, rust resistance is better than 200 series stainless steel material.High temperature resistance is also relatively good, generally used temperature limit less than 650℃.Hardness is generally around 370-400, 304 stainless steel has excellent corrosion resistance and good anti - crystal corrosion performance.
Zhuolida has more than 10 years of experience in etching the handset network, our company with a strong technical force and stainless steel etching production equipment to ensure the timely delivery of the handset network, depending on the thickness of the material we etching accuracy up to +/-0.01mm.